Automated two-leaf swing entry
- Est. investment
- $4,000 to $8,000 for the full system
- Est. duration
- 2 to 3 days
Two leaves, two operators, ball-bearing hinges, battery backup
Georgetown Metal Gates builds the resident entry, the visitor lane and the directory for HOA boards, property managers and multifamily owners across Williamson County. Board projects run from 1 keypad upgrade to a 4 lane entry with its own pedestrian gate.
We phase each stage around residents so nobody is locked out during a hang. A 3-year workmanship warranty protects every weld, hinge and gate travel on gated community entries, backed by 1,412 projects across 11 years.
From the board presentation and the reserve line to the resident rollout and the final test, our team handles every step of a community entry. Serving Georgetown, Round Rock, Cedar Park, Leander and Sunset Valley, we schedule noisy work for midday and keep the entry running at the hours residents commute.
Request a bid with your community map, entry count and resident count, and our estimator will meet the board on site and price the entry from what the walk shows.
What you can hold us to
A community entry serves residents, guests, delivery drivers and the fire department, and a shared truck entrance on a fire lane where the gate needed the fire department's switch and sensor shows why each group needs its own lane or code. The table sets out the pieces most boards ask us to price.
| Entry piece | What it does | Typical build |
|---|---|---|
| Resident lane | Opens for transponders or codes | Automated two-leaf swing entry |
| Visitor lane | Holds guests at a call box | Video intercom, keypad or phone entry with delivery codes |
| Walk-through | Lets people pass on foot | An ornamental walk-through gate beside the drive |
| Emergency access | Opens for the fire department | Knox key switch or Opticom receiver |
A long frontage where a swing gate would have needed more setback than the lot allowed is where we steer a board toward a slide leaf. An HOA with one road in keeps a second lane open while that leaf is built, and on a lot where the owners were not sure which office to ask or which deed restriction applied, we read the covenants before we draw anything.
The build below holds whether the community has 30 homes or 300, and we size the leaf and operator to the opening.
Two leaves, two operators, ball-bearing hinges, battery backup
Track set in concrete, chain or rack drive, edge sensors
Counterbalanced carriage, rack-and-pinion drive, no ground track
Video intercom, keypad or phone entry, delivery codes
Galvanized tube, powder coat, rackable panels
Investment and duration figures are estimates. Your written quote sets the final price and schedule.
Boards plan these entries against a reserve study, so the table shows estimated ranges for the pieces a community most often buys, with the time each takes on site.
| Scope | Est. price | Est. time on site |
|---|---|---|
| Dual swing driveway gate pair | Est. $4,000 to $8,000 for the full system | Est. 2 to 3 days |
| Ornamental walk-through gate | Est. $600 to $1,500 for each gate | Est. 4 to 8 hours |
| Operator added to a gate you own | Est. $1,800 to $3,800 for one operator system | Est. 4 to 8 hours |
| Recurring gate service plan | Est. $88 to $113 a gate each month | Est. 1 to 3 hours per visit |
On gated community entries, payment typically splits into a 50% deposit, a 25 to 40% progress draw and the final 10 to 25% on commissioning. These figures are budgetary estimates, subject to change, and the written quote we issue after the board walk and a look at your plans sets the final price and the schedule.

Harriet, near Old Settlers Park, Round Rock
A shared truck entrance on a fire lane where the gate needed the fire department's switch and sensor
Investment and duration figures are estimates. Your written quote sets the final price and schedule.
Harriet's job in Round Rock showed how fire-department hardware shapes any entry with a lane the engines must use. She had a shared truck entrance on a fire lane where the gate needed the fire department's switch and sensor, and we built a 26 ft cantilever across a loading entrance with a Knox key switch, an Opticom receiver and a photo eye and edge sensor set. It sat near Old Settlers Park at an estimated $7,400 to $9,800 over an estimated 3 to 4 days, and it passed the fire marshal's test, which is the sign-off a community entry on a fire lane must also pass.
The board walk measures the opening and counts the lanes, then a written scope and price range go into the reserve study. Residents receive a notice before the leaf is hung, and an entry that the city treats as its own entry gate permit, with a fire district approval for the electric operator, is why we file approvals early. Handover covers commissioning, a walkthrough for the property manager and the fire marshal test where one applies.

We phase the work so the community never loses its only way in, with crews of 3 to 4 on the motorized stage. In Serenada and Steiner Ranch a second lane carries traffic while the first is rebuilt. In Rollingwood and Volente the same sequence keeps a private street open to residents. A side yard walk gate that the owner needed approved by both the modifications committee and the city before anything was built is why we budget approval time into the schedule.
Delivery codes fix the problem of a long drive where deliveries kept stopping at the gate and the family had to walk down to open it, and they expire after the drop. The call box sits back from the gate so a car stops off the street and the leaf swings away from it. A keypad or intercom access package can log which code opened the gate and when.

Boards and managers choose us because one team builds the ornamental walk-through gate, installs the operator and offers a recurring gate service plan afterward. The part we control is under a 3-year workmanship warranty covering gate travel, gate sag, hinge alignment and welds, while the operator carries the maker's parts warranty.
We install community entries inside a 45-mile radius of Georgetown, including Cedar Park, Leander, Lost Creek and West Lake Hills. In Round Rock we have worked near the Old Town overlay, and in Sunset Valley we know the review that follows Brodie Lane and Jones Road. Start from Georgetown Metal Gates, our home page, to see all the cities we cover.

Commercial gates covers business and storage entries. Commercial security and perimeter fencing covers the fence line around a community. Gate maintenance and service contracts keep a shared entry cycling. Rental properties can see apartment gate access for resident entry systems.
Treat the entry as a reserve item and price it from the lane count, the leaf size and the access hardware. A dual swing pair is an estimated $4,000 to $8,000 for the full system, and our written quote after the board walk confirms it.
Yes. We install in phases and keep a second lane or a temporary open position working.
Yes. A visitor lane with a call box keeps guests from blocking residents, and delivery codes give couriers access for a limited time.
Yes. A community entry on a fire lane needs a Knox key switch or an Opticom receiver, and the fire marshal tests it before service. Round Rock Fire Department guidelines also call for a gate that one person can open by hand.
No. Vehicle operators are for vehicles only, so we add a separate pedestrian gate beside the drive.
We place the 811 request, since Texas law requires notice before excavation, and the owner pays for any private locate on the property.
After 11 years in business, the 3-year workmanship warranty still covers gate travel, gate sag, hinge alignment and welds. Operators and boards carry the maker's parts warranty, usually 1 to 5 years.
Send the community map, the number of entries and the resident count, and request a bid for your community entry. We will meet the board on site and return a written scope with a price range.



Start to finish
We measure the opening, the grade and the swing or slide path before anything is drawn.
You approve a scaled drawing, the metal, the finish and the operator before steel is cut.
The gate is welded in our shop, then galvanized and powder coated before it leaves for your property.
We set the posts, hang the gate, wire the operator and test every photo eye and safety edge with you.
Services
Where we work
Call us or send a site plan, photos or a gate count, and we will set a site walk and return a written bid.
Calls only, we do not receive text messages.